Surface Mounted Fire Door Seal Kits

The single door kit includes.

Surface mounted fire door seal kits.

60 minutes of fire integrity suitable for a gap of up to 11mm at the head of the door. Seals stop both fire and smoke intumescent strip and brush seals save time and labour costs. Simply stick the strips with their self adhesive backing to the frame or to the fire door itself. Easy to fit surface mounted fire door seals.

A double door kit is available which means that the seals would need to be fitted to the doors rather than the door frame so that the gap between the doors is covered. Surface mounted intumescent fire smoke seals available in white brown red black and wood veneer finishes and a alternative plain seal without brush seal to allow smoke detectors to be activated. Therm a flex intumescent strips surface mount intumescent fire smoke seals surface mounted intumescent door strips are supplied in single and double door kits in black white or brown. They can be used to upgrade older fire doors which had been installed without fire door seals.

Therm a flex is formulated from a unique chemical formulation based upon expandable graphite in a binder that allows the material to flex at normal room. In this case the door requires a threshold seal to ensure it can withstand and protect against smoke and flames in the event of a fire. Available in seal lengths. Intumescent door strips are usually designed to provide up to 30 or 60 minutes fire resistance and help to contain the fire in one area and prevent it spreading.

Available in brown or white they are supplied on a 5 meter roll which is more than enough to fit around one standard door. Only requires a minimum 4mm gap around the door. Surface mounted fire door seals are easy to install. Drop down door seals quite literally drop down automatically when the door closes to form a secure seal.

Quick and easy to install the surface mounted fire and smoke seal has a self adhesive backing which enables it to stick around the inside of the door frame. No rebating or drilling needed the seals are self adhesive. There s no need for an expensive carpenter to rebate your fire door or frame to install traditional intumescent seals as you can retrofit this yourself. 5 x 1 05m seal pieces.

They can be fitted to the door or the door frame. Once fitted the facing of the seal can be painted. This seal can be fitted to door frames in minutes. If a fire door has a gap of more than 10mm along the bottom its integrity is compromised and it allows fire and smoke to pass through and spread.

330mm 430mm 530mm 630mm 730mm 830mm 930mm 1030mm 1130mm and 1230mm. No hinge bind and no gap necessary on hinge side. Merely requires a 3 mm or greater gap down the closing stile and across the door head. Fitted directly over hinges.

While the 330mm and 430mm sizes can be cut down by 20mm and 120mm respectively all other sizes can be cut down by a maximum of 150mm. Surface mounted drop down door seal kit what s in the kit. The smoke rated surface mounted bottom door seals can be cut down to size. Use in conjunction with intumescent seals to offer the most fire protection in your fire doors.

No routing is necessary. Please check that all of the following is included in the kit before commencing work 1 x heavy black soundproofing mat 5 x lengths black self adhesive seals for sides and top of doorframe 1 x 930mm long screw on drop down threshold seal with cover door frame block and 2 spacers pack of 4 black screws and plastic insert to hide.